Class 100 Horizontal Laminar Flow Workstation
- Epoxy painted steel construction with the blower box located below the work surface
- Work area 36"w x 24 1/2"h x 22"d
- OD 39"w x 62"h x 34"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 600 cfm, with electronic speed control, (1) 1/3 HP, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- Front hepa grille of perforated, anodized aluminum
- 100 fc flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

Class 100 Horizontal Laminar Flow Workstation
- Laminated particle board construction with the blower box located below the work surface
- Work area 36"w x 28 1/2"h x 22"d
- OD 38"w x 66"h x 34 1/2"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 FPM filter face velocity, 750 CFM, with electronic speed control, (1) 1/3 hp, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 FC flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

Class 100 Horizontal Laminar Flow Workstation
- Epoxy painted steel construction with the blower box located below the work surface
- Work area 48"w x 24 1/2"h x 22"d
- OD 52"w x 62"h x 34"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 800 cfm, with electronic speed control, (1) 1/3 HP, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- Front hepa grille of perforated, anodized aluminum
- 100 fc flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

Class 100 Horizontal Laminar Flow Workstation
- Painted Steel construction with the blower box located below the work surface
- Work area 48"w x 28 1/2"h x 22"d
- OD 50"w x 66"h x 34 1/2"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1000 cfm, with electronic speed control, (1) 1/3 hp, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable, perforated anodized aluminum grille
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 FC flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

NO SPEC AVAILABLE AT THIS MOMENT

Class 100 Horizontal Laminar Flow Workstation
- Painted Steel construction with the blower box located below the work surface
- Work area 60"w x 28 1/2"h x 22"d
- OD 62"w x 66"h x 34 1/2"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1000 cfm, with electronic speed control, (1) 1/3 hp, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 fc flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

Clean Bench
- Painted Steel construction with the blower box located below the work surface (Additional Work Surface)
- Work area 60"w x 28 1/2"h x 30"d
- OD 62"w x 66"h x 42 1/2"d
- Direct drive motor blowers sized to deliver 100 FPM filter face velocity, 1250 CFM, with electronic speed control, (1) 1/2 HP, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa, tested using PSL & a laser particle counter
- Removable clear acrylic side panels
- White plastic laminate work surface
- 35% Disposable prefilter mounted in an aluminum grille on the blower box
- 100 FC flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter
- (2) Duplex receptacles w/ separate power cord mounted in the side panel

NO SPEC AVAILABLE AT THIS MOMENT

Class 100 Horizontal Laminar Flow Workstation
- Painted Steel construction with the blower box located below the work surface
- Work area 72"w x 28 1/2"h x 22"d
- OD 74"w x 66"h x 34 1/2"d
- Plastic laminate work deck
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 cfm, with electronic speed control, (1) 3/4 hp, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable side panels of 1/4" clear acrylic
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 fc flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter

Clean Bench
- Painted Steel construction with the blower box located below the work surface (Additional Work Surface)
- Work area 72"w x 28 1/2"h x 30"d
- OD 74"w x 66"h x 42 1/2"d
- Direct drive motor blowers sized to deliver 100 FPM filter face velocity, 1500 CFM, with electronic speed control, (1) 3/4 HP, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa, tested using PSL & a laser particle counter
- Removable clear acrylic side panels
- White plastic laminate work surface
- 35% Disposable prefilter mounted in an aluminum grille on the blower box
- 100 FC flush mounted fluorescent lighting mounted in a sealed canopy
- Control panel with switches for motor & lights & pressure gauge for hepa filter
- (2) Duplex receptacles w/ separate power cord mounted in the side panel

Clean Bench
- Painted Steel construction with the blower box located below he work surface
- Work area 96"w x 28 1/2"h x 22"d
- OD 98"w x 66"h x 34 1/2"d
- Direct drive motor blowers sized to deliver 100 fpm filter face velocity, 1500 CFM, with electronic speed control, (2) 1/2 hp, 110 v motor, vibration isolated
- Rear loading 99.99% gasket seal hepa
- Removable clear acrylic side panels
- White plastic laminated work surface
- 35% disposable prefilter mounted in an aluminum grille on the blower box
- 100 FC flush mounted fluorescent lighting mounted in a sealed canopy
- Acrylic side panels & removable perforated anodized aluminum grille
- Control panel with switches for motor & lights & pressure gauge for hepa filter